12
User Menu (User menu)
By pressing the P3 button the User Menu is entered.
P4 and P6 buttons are used to select the desired menu or submenu. Then, by pressing the P3 button the desired menu or
submenu is entered.
To increase or decrease the parameter value, press the P4 or P6 buttons. To save a new parameter value, press the P3
button. To cancel all modifications and return to the old values, press the P1 button.
After the parameter value has been changed, the new value is sent to the main controller.
If the transfer is not successful, the following message appears on the display:
In this case, it is necessary to modify it once more.
The User Menu contains several menus and submenus.
By pressing the P3 key the User Menu is entered and the following list of submenus is displayed:
Menu
Description
Combustion Management
Menu for modification of combustion power, calibration of
work gear engine and flue gas engine
Heating Management
Menu for modification the setpoints for temperature of
water in the boiler, buffer and other heating parameters.
Chrono
Menu for selecting chrono program mode and boiler
on/off times
Manual Load
Menu for manual loading of the auger. It is only feasible
when the system is in the OFF state
Time and Date
Menu for setting time and date
Remote Control
Radio-command activation menu
Language
Menu for changing the language on the control panel
Keyboard Menu
Menu for adjusting the contrast and brightness of the LCD
panel
System Menu
Menu for accessing technical settings
14.3. 1.
COMBUSTION MANAG EMENT ME NU
This is a menu for the modification of parameters that determine the combustion of the cooker. It contains several
submenus.
The menu is entered by pressing the P3 button, and the following submenus are listed:
