STARTING AN
D O
PERA
TIN
G
176
To Resume The Speed
NOTE:
Before returning to the previously set speed,
you must accelerate to a speed close to the
set speed, then push and release the RES
button.
Resume Button Location
While in AutoStick (sequential) mode, before
recalling the previously set speed, you should
accelerate until you are close to that speed.
Then, push and release the RES button.
To Deactivate
Lightly pressing the brake pedal deactivates
the Speed Control without deleting the set
speed.
The Speed Control may also be deactivated by
applying the electric park brake or when the
braking system is operated (e.g. operation of
the ESC system).
The set speed is deleted in the following
cases:
Pushing the on/off button twice
The ignition is placed in the OFF position
There is a malfunction with the Speed
Control system
ADAPTIVE CRUISE CONTROL
(ACC) — IF EQUIPPED
System Description
Adaptive Cruise Control (ACC) is a driver assist
system that combines the speed control func
-
tions with maintaining the distance from the
vehicle ahead.
The system allows to set and hold the vehicle
at the desired speed without needing to press
the accelerator. It also allows to set and hold a
distance from the vehicle ahead (these
settings are set by the driver).
The Adaptive Cruise Control (ACC) system uses
a radar sensor located behind the front
bumper and a camera located in the center/
upper part of the windshield, to detect the
presence of a vehicle close ahead.
Front Bumper Radar Location
Windshield Camera Location
20_GU_OM_EN_USC_t.book Page 176