Alfa Romeo Giulia 2019, Руководство пользователя

Страница: 32 / 212

GETTING TO KNOW YOUR VEHICLE
30
low beams until the approaching vehicle is
out of view.
This function is enabled with the Information
and Entertainment System, and can only be
activated with the light switch turned to the
(AUTO) position.
The first time that the high beam headlights
are activated, the Automatic High Beam
Headlights system will activate as well, and
the warning light
or the symbol will
illuminate in the instrument panel.
If the high beam headlights are on, the blue
icon/warning light
will illuminate in the
instrument panel.
NOTE:

If the system recognizes heavy traffic
areas, the automatic functions remain
disabled independently of the vehicle’s
speed.

The Automatic High Beam functionality
may also be influenced by:

Reflections on road signs

Dim headlights from oncoming traffic

Poor weather conditions

Presence of dirt or other obstructions
on the sensor

Damage to the windshield
Turn Signals
To activate the turn signals function, move
the multifunction lever, located on the left
side of the steering wheel, up or down until
it reaches the detent. Moving the lever
upward flashes the right turn signal and
moving the lever downward will flash the left
turn signal.
The or turn signal will blink on the
instrument panel.
The turn signals turn off automatically when
the vehicle is brought back onto a straight
course.
“Lane Change” Function
Tap the lever up or down once, without
moving beyond the detent, and the turn
signal (right or left) will flash five times.
Then, the turn signal (right or left) will auto
-
matically turn off.
To turn off the flashing before the end of the
cycle, move the lever in the opposite direc
-
tion until the first click (about half way).
Static Bending Light Function (SBL) — If
Equipped
The SBL function utilizes Light Emitting
Diodes (LEDs) in order to better illuminate
the street and increase the light angle while
turning. This function is enabled by rotating
the light switch to position or (AUTO).
The SBL LEDs activate when the speed is
below 25 mph (40 km/h) and the steering
radius is below 0.3 miles (500 m).
This function can be activated/deactivated
on the Information and Entertainment
System by selecting the following functions
in sequence on the main menu:
1. “Settings.”
2. “Lights.”
3. “Cornering Lights.”
2019_ALFA_GIULIA_COMBINED_UG_USA.book Page 30