Alfa Romeo Giulia 2019, Руководство пользователя

Страница: 121 / 212

119
2. When the vehicle has reached the desired speed,
push the SET switch up or down and release to
activate. When the accelerator is released, the
vehicle will maintain the selected speed auto
-
matically.
SET Switch Location
If needed (when overtaking for instance), you
can accelerate beyond the set speed by
pressing the accelerator. When you release
the pedal, the vehicle will return to the previ
-
ously set speed.
When traveling downhill with the system
active, the vehicle speed may slightly exceed
the set one.
NOTE:
Before pushing the SET switch, the vehicle
must be traveling at a constant speed on a
flat surface.
Increasing/Decreasing Speed
Increasing Speed
Once the Speed Control has been activated,
the speed can be increased by pushing the
SET switch upward.
By keeping the switch pushed, the set speed
will increase until the switch is released. The
new speed will then be set.
At every movement of the SET switch, the set
speed can be adjusted.
Decreasing Speed
When the system is active, to reduce the
speed, push the SET switch downward.
By keeping the switch pushed, the set speed
will decrease until the switch is released.
The new speed will then be set.
At every movement of the SET switch, the set
speed can be adjusted.
NOTE:
Moving the SET switch allows to adjust the
speed according to the selected unit of
measurement set on the Information and
Entertainment System (see dedicated
supplement).
Accelerating When Overtaking
Press the accelerator as you would normally.
When the pedal is released, the vehicle will
return to the set speed.
Use Of The Feature On Hilly Routes
The system can automatically downshift to
keep the set speed when driving on hilly
routes.
On steep grades, the loss or gain in speed
may be considerable and is advisable to
deactivate the Speed Control.
NOTE:
The system keeps the speed set even uphill
and downhill. A slight variation in the speed
on slight rises is completely normal.
Recalling The Speed
Once the system has been deactivated, but
not canceled, the previously set speed can
be recalled by pushing the RES button and
removing your foot from the accelerator. The
system will be set to the last stored speed.
2019_ALFA_GIULIA_COMBINED_UG_USA.book Page 119