Alfa Romeo 4C Spider 2020, Руководство пользователя

Страница: 47 / 164

GETTING TO KNOW YOUR INSTRUMENT PANEL 45
B
LUE
I
NDICATOR
L
IGHTS
High Beam Indicator Light
This indicator light will illuminate to
indicate that the high beam
headlights are on. With the low beams
activated, push the multifunction
lever forward (toward the front of the vehicle) to
turn on the high beams. Pull the multifunction
lever rearward (toward the rear of the vehicle) to
turn off the high beams. If the high beams are
off, pull the lever toward you for a temporary
high beam on, “flash to pass” scenario.
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated
onboard diagnostic system called OBD II. This
system monitors the performance of the
emissions, engine, and Alfa Twin Clutch
Transmission control systems. When these
systems are operating properly, your vehicle will
provide excellent performance and fuel
economy, as well as engine emissions well
within current government regulations.
If any of these systems require service, the
OBD II system will turn on the “Malfunction
Indicator Light (MIL)”. It will also store
diagnostic codes and other information to
assist your service technician in making repairs.
Although your vehicle will usually be drivable
and not need towing, see an authorized dealer
for service as soon as possible.
O
NBOARD
D
IAGNOSTIC
S
YSTEM
(OBD II)
C
YBERSECURITY
Your vehicle is required to have an Onboard
Diagnostic system (OBD II) and a connection
port to allow access to information related to
the performance of your emissions controls.
Authorized service technicians may need to
access this information to assist with the
diagnosis and service of your vehicle and
emissions system.
For further information, refer to “Cybersecurity”
in the “Multimedia” section.
CAUTION!

Prolonged driving with the MIL on could
cause further damage to the emission
control system. It could also affect fuel
economy and driveability. The vehicle must
be serviced before any emissions tests can
be performed.

If the MIL is flashing while the vehicle is
running, severe catalytic converter damage
and power loss will soon occur. Immediate
service is required.
WARNING!

ONLY an authorized service technician
should connect equipment to the OBD II
connection port in order to read the VIN,
diagnose, or service your vehicle.

If unauthorized equipment is connected to
the OBD II connection port, such as a
driver-behavior tracking device, it may:

Be possible that vehicle systems,
including safety related systems, could
be impaired or a loss of vehicle control
could occur that may result in an acci -
dent involving serious injury or death.

Access, or allow others to access, infor -
mation stored in your vehicle systems,
including personal information.
3
20_4C_OM_EN_USC_t.book Page 45