Alfa Plam LUCA 12, Инструкция по эксплуатации и техническому обслуживанию

Страница: 23 / 28

20
3
ROUTINE MAINTENANCE, TYPE 1 ACTIVITY
These activities should be done daily, depending on conditions of use.
After a certain amount of time of using the furnace, the user can specify the appropriate frequency of cleaning and
maintaining the furnace.
⚠
ATTENTION: Any cleaning activity must be carried out when the furnace is completely cold and disconnected from the
power supply (with a cable unplugged from the socket).
Number of maintenance activities is increased in proportion to the intensity of use of the furnace.
⚠
ATTENTION: Make sure that the ash is completely cold before you start cleaning the furnace. When you make sure the
ash is cold, you can clean it with a vacuum cleaner.
Periodic type 1 maintenance is carried out in accordance with the following procedure:
1. Slowly open the furnace door so that the accumulated ash doesn’t splatter due to fast movement.
2. Remove the grid.
3. Remove the burner.
4. Using a vacuum cleaner and a wire brush (or other sufficiently abrasive material) clean the ash and
other debris from the burner because this debris prevents the passage of air.