Alfa Network Optigo SFMC, Инструкция по эксплуатации, Страница: 13 / 40

31481875EN-00
13
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
All lifting procedures must be carefully carried
out by properly qualified personnel, ensur-
ing absolute safety at all times. Lift the unit to
mounting position and secure following instruc-
tions given in chapter "6 Installation" .
After having secured the cooler, the forks may
be lowered and the remaining packaging materi-
als can be removed.
5.3 Lifting
Ensure that the cooler is not lifted directly onto the drip tray or the finned coil. Utilizing the proper
wooden transport beams and/or pallets prevents the cooler bending at the extremes such that the
cooling circuit or other components are damaged.
5.2 Units packed with crate
Place the unit on the ground and loosen the fix-
ing materials from the top crate.
Remove top crate.
Unpacked coolers must be turned before mount-
ing.
Manually turn the air cooler into mounting posi-
tion on a second wooden pallet. Use adequate
protective material to prevent the driptray from
damaging. The cooler is now ready to be lifted
into mounting position.