Instruction Manual, SSB Retractor - Mini Retract-A-Ball
Page 5
Standard machines and machines delivered with ATEX certification
in accordance with Directive 94/9/EC
IM-TE91A901-EN1
If ordered with ATEX certificate:
ATEX Marking
The SSB Retractor - Mini Retract-A-Ball is certified as category I components. The certification is
carried out by the notified body Baseefa, who has issued the certificate Baseefa 11ATEX0231X. The
marking on the ATEX certified SSB Retractor - Mini Retract-A-Ball is as follows:
Note:
TE75P231-04 and TE75P251-04
These machines are approved for 180°C max: Tamb -10°C to +180°C.
Changes to the machine are not allowed without approval by the person responsible for the ATEX
certification at Alfa Laval Tank Equipment A/S. If changes are made – or spare parts other than Alfa
Laval original spare parts are used - the EC Type Examination certification (the ATEX Directive) is no
longer valid.
Important
ATEX
information:
Also see page 19 regarding special conditions for repair of ATEX certified
machines.
Design Overview
The unit has been specifically designed to ensure good self draining so that there is no hold up of
cleaning media after operation; this is achieved by a sealed cleaning housing and telescopic actuation
and air cylinder design which ensures the minimum surface area becomes wetted. No media enters the
spring chamber. After operation the SSB Retractor can be held open pneumatically while the spray
stem self drains before closure by the return spring. This provides the opportunity to purge the spray
stem if required.
Alfa Laval Tank Equipment A/S
Baldershoej 19,
Ishoej
-DK
Type:
SSB Retractor 120/A/S Duct EPDM
Art Nr:
TE75P251
s/n:
SSB-R-XXXX-XX-XX
Tag No:
XXXXX
Temp:
140 deg C Max.
Air Pressure:
4 Bar Max
Media Pressure:
4 Bar Max.
1180
Baseefa11ATEX0231X
1GDc T(Variable)Tamb-10°C to +140°C
Sequential number
Month
Year
