Alfa Laval M line TS6, Инструкция по эксплуатации

Страница: 16 / 46

3.4 Multi-section
A multi-section heat exchanger can be set up by using connection plates. An
example of multi-section configuration is when a media needs to be heated in
one stage and then cooled down in the next stage.
Each of the connection plates can be configured by selecting different corner
connections such as single, double, pass-through or blind.
1 1 2 2 3 3 4 4
Figure 3: Example of a multi-section set up.
1.
End plate I
2. End plate II
3. Channel plates
4. Transition plate
200000423-1-EN-GB 16
3 Description EN