Alfa Laval LeviMag, Инструкция по эксплуатации, Страница: 10 / 68

2 Safety and information
Step 4
During transportation:
1. Always protect shaft and the drive rotor.
Foreign magnetic particles can be attracted by the drive rotor due to the magnetic field.
2. Never expose the mixer to undue vibrations or shocks.
3. Inspect for oil leakage on gear’s with vent screw – if leakage due to incorrect position/angle of gear motor, oil
level must be verified - total oil quantity in gear motor is to be found on gear motor name plate.
!
䵭
2.6 Recycling information
Unpacking
- Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps.
- Wood and cardboard boxes can be re-used, recycled or used for energy recovery.
- Plastics should be recycled or burnt at a licensed waste incineration plant.
- Metal straps should be sent for material recycling.
Maintenance
- During maintenance, oil and wear parts in the machine are replaced.
- All metal parts should be sent for material recycling.
- Worn out or defective electronic parts should be sent to a licensed handler for material recycling.
- Oil and all non-metal wear parts must be disposed of in accordance with local regulations.
Scrapping
- At the end of use, the equipment must be recycled according to the relevant, local regulations.
Besides the equipment itself, any hazardous residues from the process liquid must be considered and dealt with in a proper
manner. When in doubt, or in the absence of local regulations, please contact your local Alfa Laval sales company.
10