Alfa Laval FrontLine ClipLine, Инструкция по эксплуатации, Страница: 21 / 68

3.5 Multi-section
A multi-section plate heat exchanger can be set up by using connection
plates. An example of multi-section configuration is when a media needs to be
heated in one stage and then cooled down in the next stage.
Each of the connection plates can be configured by selecting different corner
connections such as single, double, pass-through or blind.
1 1 2 2 3 3
Figure 3: Example of a multi-section set up.
1.
End plate I
2. End plate II
3. Channel plates
200000420-4-EN-GB 21
Description 3 EN