To enter the global setup menu, first hold down the PAGE / MENU knob
(lower right,) then hold the left footswitch.
Turn the lower left knob to select the parameter you want to change, then
turn the lower right knob to set its value.
Hold the PAGE / MENU knob (lower right) to save your settings and exit
the menu.
GLOBAL SETUP MENU
M.JACK
EXPRESSN MultiJack is expression pedal input
FOOT. SW MultiJack is foot switch input
MIDI
MultiJack is MIDI input (requires MIDI to TRS adapter)
CHANNL Sets MIDI input channel
STEREO
MONO IN INPUT jack is mono
INP. SUM INPUT jack sums to mono
STEREO
INPUT jack is stereo
RPHASE
Sets phase of R output, allows correction for amp or effect phase.
PRESET
Sets number of presets available on device. Does not affect MIDI.
DISPLY PRESET
Display shows preset except when turning knobs
KNOBS
Display shows knobs except when loading preset
OFF
Display is off when not adjusting knobs
BRIGHT
Sets display brightness
RETURN
Timer for display to return to normal state
CC OUT
OFF
Pedal does not send MIDI CC values
JACK
Pedal sends MIDI CC from MultiJack
USB
Pedal sends MIDI CC from USB MIDI
BOTH
Pedal sends MIDI CC from both
TRAILS OFF - hard bypass, ON - trails bypass, AUTO - trails fade out
EXP LO / HI Sets heel and toe calibration for expression pedal
TAPCNT
Enable or disable tap tempo timer display
PWR ON Choose
BYPASS or ENGAGE to set the power-on state of pedal
RESET
Turn to reset CONFIG, PRESETS, or ALL. Hold PAGE knob to reset.
Select
MIDIDUMP to export presets over USB MIDI
QUICK START GUIDE
BETA 4
SPACE
SPACE
FORCE
FORCE
reverberation
CONTROL KNOBS
ADJUST PARAMETERS
AS SHOWN ON DISPLAY
PAGE KNOB
TAP TO CHANGE PAGE
HOLD TO ACCESS MENU
TAP / CTRL SWITCH
TAP TO SET TEMPO
HOLD TO FIRE RAMP
BYPASS SWITCH
TAP TO BYPASS OR ENGAGE
HOLD TO LOAD NEXT PRESET
INPUT
MONO OR TRS
STEREO INPUT
RIGHT
R STEREO OUTPUT
LEFT
MONO OUTPUT
OR TRS STEREO
MULTI
EXPRESSION
PEDAL OR MIDI
Mankind has long known of the amazing properties of reverberant spaces. From
the brilliant reflections of the largest concert halls to the splashy depths of your own
shower, every space has its own characteristic sound.
The Space Force is our love letter to the sounds of “elsewhere,” and features eight
ingenious ways to add some space to your place, whether you’re reaching for the
stars or just trying to make your world a little bigger.
Using the pedal is pretty simple: plug your instrument into the INPUT jack and your
amplifier or other effect into the L jack, power up the pedal with 9V 250mA or more,
and turn some knobs. As soon as you touch a knob, the display will change to show
what is happening. You can also tell the pedal to stay in the knobs display mode in
the Setup menu.
The lower-right knob has a pushbutton switch, tap that to access extra parameters
on the back pages of the user interface. We’ve put the most
common controls up front, tweaking stuff on page 2, and utility
items on page 3. Three small boxes at the bottom of the display
indicate the currently selected page.
This guide covers the basics of the pedal including its connec-
tions, controls, and features. For more detailed information you
can scan the code in this section to be taken to our website
foraccess to the full manual, MIDI information, firmware updates,
and more.
BASIC OPERATION
PRESETS
How do you make quick changes on a pedal that has 12+ knobs? PRESETS. Every
Leap Series pedal
allows you to save up to 32 presets that contain the entire state of
the pedal.
Loading a preset recalls all knob positions and expression pedal mappings.
To load a preset, hold the BYPASS / PRESET footswitch. You can set the number
of available presets in the Setup Menu, from 1 to 8. You can also access the other
preset banks 9-16, 17-24, and 25-32.
To save a preset, first use the pedal knobs to tweak the sound, then hold the PAGE
knob. Press and hold the BYPASS / PRESET footswitch to enter the save menu.
If you want to save to the current preset, you can just hold down the BYPASS / PRE-
SET footswitch again. If you prefer to rename the preset, turn the PAGE knob to se-
lect a character in the name and then tap the PAGE knob to edit that character. Use
the PAGE knob to select the preset number and edit to change the save location.
scan me for more info!
reverberation
reverberation
reverberation
FORCE
FORCE
SPACE
SPACE
BYPASS | PRESET
TAP | CTRL
SERIES
SERIES
SERIES
R
L
IN
CTRL
DOT MATRIX DISPLAY
DOT MATRIX DISPLAY
DOT MATRIX DISPLAY
PAGE
PAGE
MENU
MENU
PAGE
MENU
9V DC INPUT
250 MA, CENTER NEGATIVE
USB PORT
USB MIDI AND
FIRMWARE UPDATE
PRESET DISPLAY
PRESET NUMBER & NAME
SOUND MODE NAME
KNOB DISPLAY
KNOB NAMES & VALUES
PAGE INDICATOR BOXES
