Alesis Melody 54, Руководство пользователя

Страница: 10 / 56

10
Rhythm Programming
You can use the rhythm programming feature to create your own custom drum rhythm to
accompany you while you play the keys.
To create a custom accompaniment rhythm:
1. Press the Program button to enter Programming Mode. Prg will appear on the Display , and the
keys will automatically shift to percussion sounds.
2. Program the rhythm by playing each drum sound in the order that you want to hear them repeat
in the rhythmic pattern. You can play the drum sounds with the keys or with the
Drum Kit
buttons . If using the keys, see the image above each key in order to know what drum sound a
key will play. The programmed rhythm can contain up to 32 drum sounds. Each drum sound in
the pattern will be the length of a quarter note.
Note: You cannot program two percussion sounds to play at the same time.
3. Press Play to stop programming and hear the rhythm play on a loop. Ply will appear on the
Display .
4. After pressing Play , the keys will automatically switch back to the last selected tone, and you
can play along to your custom rhythm.
To change the tempo of the custom rhythm , press the Tempo + button or Tempo - button .
Press the Tempo + and Tempo - buttons simultaneously to reset to the default tempo ( 120 BPM ).
To adjust the volume of the custom rhythm, press the Rhythm Vol + or Rhythm Vol – button .
Press the Rhythm Vol + and Rhythm Vol – buttons simultaneously to reset to the default volume
level (indicated on the Display as A07 ).
To stop the custom rhythm from playing, press the Play button again. The keyboard will re-enter
Programming Mode, and you can program a new rhythm or press the Play button to start the
previously programmed rhythm. Alternatively, you can stop a custom rhythm from playing by
pressing the
Program button, which will make the keyboard exit Programming Mode and erase the
rhythm that was playing. When you exit Programming Mode, OFF will temporarily appear on the
Display .
Note: If you turn off the keyboard while using a custom rhythm, the custom rhythm will be erased.
Tip: With Programming Mode activated, press the Single chord button while a custom rhythm is
playing or stopped. This will allow you to use the abbreviated chord shapes (pictured in the previous
section) on the keys below
G2 to play full chords. The chords will not automatically play along with
the custom rhythm; they will stop ringing out after you release the keys. However, you will still have
the ability to play full chords at the quick touch of 1-3 adjacent keys.