-36-
Within those 180 seconds, press the “
+
” or “
-
” button to
switch off the alarm clock. After 24 hours, according to the set
wake-up time, the alarm signal will sound again. You may set
the sliders at the sides to “OFF” to fully switch off the alarm
clock.
Snooze function:
While the alarm sounds, press the “
SNOOZE & LIGHT
” button
on top of the clock to stop the alarm signal and enable the
snooze mode. The snooze icon
Z
Z
and alarm clock icon
start flashing. When the snooze mode is activated, the alarm
signal will sound again after 5 minutes. You may activate the
snooze function up to 7 times in a row.
To stop the alarm signal:
While the alarm signal sounds, set the slider(s) to “OFF” to
stop the alarm signal. The alarm clock is now disabled.
Type of wake-up signal:
Use the alarm mode switch to choose between the
sound or vibration alarm. Set this slider to
to
activate the vibration function or set this slider to
to activate the sound function. Use the “Alarm” slider
to set the volume of the sound signal. “LO” stands for a
low level and “HI” for a higher level.
Remark: When using the vibration function, please
make sure that the clock is securely standing on
its surface to prevent the clock from sliding off the
table or other flat surface.
ALARM MODE
ALARM
LO
HI