ALDI Ferrex 809147, Руководство пользователя

Страница: 17 / 22

5. Release the power switch as soon as the screw / nut is in the desired position.
Cleaning
1. Switch off the device 1 remove the battery 10 from the battery holder 9 .
2. Let the device and the accessory tool cool down completely.
3. Clean the housing with a soft, slightly damp cloth.
4. Clean the connection contacts of the battery holder with a dry, clean cloth.
5. Dry the device thoroughly and leave it to dry completely for a while.
Maintenance
The device and accessories are maintenance-free!
Do not lubricate the device. Dust and chips will deposit on a film of
grease and increase wear!
Testing
Regularly inspect the device and its accessories to ensure that they are in fault-free
condition and
- inspect the controls for damage.
- ensure that the accessories are in perfect condition.
- check that the vents are open and clean.
Do not operate a damaged device or accessory. Have the damaged device or
accessory checked and repaired by an authorised service centre.
Storage
NOTE!
Risk of damage!
Improper storage of the device can result in damage.
- Allow the device to completely cool down.
- Place the device so that it can’t fall into water.
- Store the device in a clean, dry, frost-protected place out of
the reach of children.
1. Thoroughly clean the device (see “Cleaning”).
2. Always store device parts and accessories together with the device.
3. If possible, pack the device in the original packaging.
Operation
17