ALDI AU4-PE-3A, Руководство пользователя

Страница: 5 / 14

Pedometer with Speed Sensor Function Keys/Modes/Setting
_____________________________________________________________
AFTER SALES SUPPORT

service@produktservice.info

Toll Free Number 1-800-493-9137
5
Notes on operating instructions 2.7
We have structured the operating instructions for this pedometer in such a way that
you can always find the information you require using the themed topics in the table
of contents.
Additionally, you can refer to the FAQ section on our online product service page for
further help with your pedometer.
http://www.produktservice.info EAN Code: 20014483
3. FUNCTION KEYS/MODES/SETTING
How to use the clip 3.1
1. Attach the clip to the pedometer. For correct alignment, see the clip on the
pedometer and small arrows.
2. Attach the pedometer to your belt or waistband. If you attach it as shown,
you can read the values from above when wearing it. Or you can put the
pedometer without a clip in your pocket.
Function keys of the Pedometer 3.2
We would like to advise, that the upper key in the drawing above is identified as
“SEL” in the following text, as well as the lower key is identified as “SET”.
Pedometer 3.3
This pedometer is delivered in sleep mode. Please press any key for entering the
First Setting Mode.
All digits are shown shortly. Then “Unit” is displayed and “KM” is flashing. Now please
follow the below instructions.
Note: If you have set wrong data and you will restart setting, please make a total
reset by pressing the “SEL”- and the “SET”-key simultaneous for 3 seconds or you
can also remove the battery and insert it again.
Set Unit
Press SEL to toggle between KM or Mile. Press SET to confirm and
advance to SET Time. If KM is selected, the scale of the unit will be in
KM, KG, Meter. If Mile is selected, the scale of the unit will be in Mile,
LB, Inch.
SEL
MODE
SET