20
Digital Inverter Generator with Pure Sine Wave
AFTER SALES SUPPORT
e-mail: [email protected]
1300 889 028
MODEL: №. XG-KF2000 • 03/2020 • 700069
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: [email protected]
1300 889 028
Digital Inverter Generator with Pure Sine Wave
MODEL: №. XG-KF2000 • 03/2020 • 700069
4. Tilt the generator forwards (Fig F), so that the oil can drain from the oil
reservoir into the oil pan through the oil drain tube.
5. When completed draining, remove the oil drain tube by rotating in an
anti-clockwise direction. Reinstall the oil filler cap/dipstick (12) and rotate
in a clockwise direction until secure.
6. Refer to the previous instructions on page 18 for
“Filling and checking the engine oil” to refill the
oil reservoir.
CAUTION.
Check that no foreign material, debris,
dust enters the crankcase.
7. Ensure to replace the oil filler cap/dipstick (12)
after refilling with fresh oil by securing it in a
clockwise direction.
Method 2
1. Place the generator on a flat and level surface and warm up the engine
for several minutes. Then stop the engine.
2. Place an oil pan at the front of the generator ensuring it is in front of the
oil filler cap/dipstick (12) area. Commence removing the oil filler cap/
dipstick (12) by rotating in an anti clockwise direction to remove, so that
the oil can be completely drained from the oil reservoir.
WARNING:
Oil may be warm to hot. It is recommended to wear gloves
for protection.
3. Using a 13mm spanner (not supplied), loosen the oil drain plug screw
(33) in an anti-clockwise direction until loose, then remove.
4. Tilt the generator forwards, so that the oil can drain from the oil reservoir
into the oil pan.
5. When completed draining, re install the oil drain plug screw in a
clockwise direction until secure. Reinstall the oil filler cap/dipstick (12)
and rotate in a clockwise direction until secure.
I.
F.
