User manual
Alcohol breath tester
The AlcoSense Elite2 is a convenient, easy-to-use breathalyser. It combines the quality of a professional grade
device with the convenience of portability and simplicity. The AlcoSense Elite2 features single-button operation, a
bright 2-digit LCD display and reusable mouthpieces.
Contents
Breathalyser, Mouthpieces(x5), AA Batteries(x2), and User Manual
How to use
1. Press the power button to turn the unit on. The cumulative test count and precious test result will be displayed
alternately as you hold the power button down.
2. Release the power button. The unit will countdown to zero whilst it warms up.
3. Secure your lips around the mouthpiece and blow sharply and steadily into the unit for about 4 seconds. You
will hear two beeps when the device has completed sampling your breath. The digit "0" will move left to right on
the display as the device analyses the sample.
4. When analysis is complete, the test result will be displayed.
5. The result will be shown for about 15 seconds then the unit will shut itself off automatically.
*Do not block the ventilation hole at the back of the unit during a breath sample.
*Various mouthpieces can be used with the AlcoSense Elite2 as shown below.
Warnings
a. Do NOT use the AlcoSense Elite2 as a tool to drink and drive.
b. Wait at least 20 minutes after eating or drinking before testing. Alcohol remaining in the mouth, or even excess
saliva, may interfere with testing. This includes alcohol based mouthwash or similar products.
c. Avoid testing in high wind or enclosed spaces. Poor ventilation may also lengthen the time required for the unit
to warm up between tests.
d. Do not blow smoke, saliva or other contaminants into the mouthpiece as this may damage the sensor.
e. Keep out of reach of children and avoid exposing the unit to extreme temperatures.
Specifications
Sensor
Semiconductor type Alcohol sensor
Indication of B.A.C
0.00 to 0.40% BAC
Accuracy
+/- 0.01 %BAC at 0.05 %BAC
Operation Temperature
0ºC to 40ºC
Storage Temperature
0ºC to 50ºC
Response Time
within 5 seconds
Display
2-Digit LCD
Power Supply
2 x AA alkaline batteries
Mouthpiece
MP6000 and various straws
Dimensions (mm)
110 high x 46 wide x 20 deep
Weight
90g including batteries
Warning Display
Flo - If you see"Flo"in the display, the breath sample was not strong enough for measurement. Please power on
the unit again and make sure your breath is strong and steady during sampling.
bat -
If you see "bat" in the display, the battery power is low. Please replace the batteries, making sure that
you are using standard alkaline batteries (not heavy duty).
Cal - If you see "CAL" in the display, the unit needs a recalibration service.
S E n - If you see "SEN' in the display, there is a problem with the sensor.
Warranty
