Alcorn Mcbride V16Pro, Руководство пользователя

Страница: 84 / 179

WinScript Live Command Reference Page 84
External Communication Events
Built-In Events send a custom message to a specific Ethernet or serial device.
To Do This… Use This Event…
Control a custom device
Message Out
Create a custom string to send
Format
Send a message to the “Live Log”
Log Message
Message Out
Sends a custom serial message out one of the serial ports. The message is sent in the protocol
defined for that port, but the Show Controller will not wait for an ACK or other response unless a
TCP connection is required.
Event Syntax
Event
Data1 Data2
Message Out Name of Port Name of String Variable or Literal Message
Example #1
Event
Data1 Data2
Message Out Port3 DataMsg
Sends (where h represents hex character):
Hello h0D
If DataMsg is:
"Hello\r"
Log Message
Send a message to appear in the “Live Log” in WinScriptLive.
A log message has a priority of “Information”, “Warning” or “Error”.
Optionally, variables may be used as part of the string the string. This is similar to the sprintf
function found in C.
Event Syntax
Event Data1 Data2
Data3…. DataN
Log
Message Priority of the
message Format String: "hello
%s %d" Variable Name