L1&L2
Service
Manual
TCL
Communication Ltd.
Rev.: 1.0
Venice 5048A_I_U_Y & 5148A_I Level 1 & Level 2 Service Manual
Page: 23/32
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
6.2. Disassembly process
Please refer to < Disassembly Process for Venice> in support website (CSS/RSH) for details.
1. Video path on CSS: Go into Venice (5048A_I_U_Y & 5148A_I) file
REPAIR TIP
Video
2. The complete disassembly guide is described in the video for your reference, you can selectively
(except disassembly and assembly method which needs to be followed carefully) do some of those
steps according to the spare part which you need to replace.
3. Actual Spare Part List depends on the CU reference. Please check with RSH website or SCS system
for the spare part list of specific CU.
6.3. Reassembly process
Please make reference to the disassembly process for assembly reverse an order of the disassembly
steps.
Attention:
1) Before assemble main PCBA on the furnished underfilling, make sure
side key FPC
,
receiver
,
5M
Rear Cam Conductive
,
8M Rear Cam Conductive
and
P-sensor rubber
are well assembled on the
furnished underfilling.
Note: please pay attention to the assembling direction of
P-sensor rubber
and receiver.
2) Before assemble main PCBA on the furnished underfilling, make sure that
front camera(and rubber)
,