Alcatel SPEED TOUCH 710, Руководство пользователя

Страница: 218 / 254

Introduction
General CLI
information
CLI help
Navigating through CLI
levels
20 Maintenance - Speed Touch CLI
218 / 254
3EC 17605 AAAA TCZZA Ed. 02
20.1.3 CLI Command Basics
Although it is not the aim of this subsection to give a complete
overview of all possible configurational AST710 items, this
subsection describes some of the generalities of the native CLI
environment.
Once you accessed your AST710 you will get the CLI prompt:
=>
.
From this point you can start entering your commands.
The CLI access is structured in what is called levels".
The
=> prompt indicates that you are in the root" level of the
CLI.
Typing
help
at the root prompt shows you the available
command groups:
=>help
Following command groups are available :
voice config system software ip
phonebook nat cip ppp pptp
bridge td dns dhcp
=>
Entering the name of a command group, accesses you to this
specific level.
For example, entering
=>config
followed by pressing 'Enter',
brings you to the config" level.
This is indicated by its own prompt:
[config]=>