Alcatel SPEED TOUCH 710, Руководство пользователя

Страница: 136 / 254

AutoPVC
Operation of AutoPVC
Criterion 1
Criterion 2
12 Networking - ATM
136 / 254
3EC 17605 AAAA TCZZA Ed. 02
12.2.3 AutoPVC and the Phonebook
The default VCs, can be remotely modified via the AutoPVC
feature of the AST710 . AutoPVC operates only in conjunction with
the Alcatel DSLAM - often referred to as ATM Subscriber Access
Multiplexer (ASAM) - and AST710 , and offers the functionality
that user VCs, to be terminated on the Ethernet port, can be
notified by the AST710 .
Basically the following steps are executed:
1. The SP configures VCs on the DSLAM.
2. Via AutoPVC the VPI/VCI values are communicated to the
AST710 .
3. AutoPVC messages are subsequently processed by the
AST710 , according to the two criteria listed below.
Any PVC, or VPI/VCI communicated via AutoPVC is added to the
AutoPVC list on the 'Phonebook' page.
If AutoPVC is not supported by the DSLAM, this list is empty.
An AutoPVC VPI value in the range from 0 up to 15 will be
notified in the AutoPVC list.
If the VPI/VCI value is used in the Phonebook, this phonebook
entry will be highlighted by a yellow bar.