Alcatel SPEED TOUCH 710, Руководство пользователя

Страница: 113 / 254

Introduction to routing
In this subsection
Configuring the AST710
for LIS connectivity,
basic
11 Configuration and Use - CIP & IP Routing
113 / 254
3EC 17605 AAAA TCZZA Ed. 02
11.2.6 Adding Appropriate Routes to the Routing Tables
IP routing is a very important aspect of a LIS configuration.
This subsection describes how you can ensure endtoend
connectivity for a CIP environment.
Configuring the AST710 for LIS Connectivity, Basic
Configuring the AST710 for LIS Connectivity, Advanced
Configuring your LAN PCs for EndtoEnd Connectivity
Routing Table Configuration.
Generally, for proper CIP routing, an IP route pointing to the
remote access router must exist in your AST710 's IP routing table.
If the remote access router is RFC1577/RFC2225 compliant, no
routes for LIS connectivity need to be configured by yourself for the
AST710 's IP router. This because it automatically adds two
necessary routes as soon you configure the CIP member, i.e. two
default gateways, thus
any
(0.0.0.0/0) as source address, and
with:
The LIS's local CIP member's IP address, i.e. the AST710 's
CIP interface address as destination
and
The LIS's IP subnetwork (based on the CIP member's IP
parameters) as destination.
As the RFC1577/RFC2225 compliant remote access router, falls
within the same LIS as the AST710 CIP member, it is also a
member of the second route's destination IP subnetwork.
If the remote access router is not RFC1577/RFC2225 compliant,
you must add this default route (with the known remote IP
address) yourself.