Chassis Management Module (CMM)
Monitoring CMM Modules
OmniSwitch 7700/7800 Hardware Users Guide
April 2005
page 4-15
Monitoring CMM Modules
Front Panel LEDs
The CMM provides a series of status LEDs on the module’s front panel. These LEDs offer basic status
information for the following switch functions:
•
CMM hardware operation (OK1)
•
System software (OK2)
•
CMM redundancy (PRI and SEC)
•
Chassis ambient air temperature (TEMP)
•
Fan status (FAN)
•
Ethernet management port (LINK and ACT)
Refer to
for detailed information on CMM front panel LEDs.
Accessing General CMM Information
The switch’s Command Line Interface (CLI) offers CMM monitoring commands. These commands allow
you to access general CMM hardware information as well as the current operating status of CMM-related
components.
CMM Hardware Information
The
and
commands are used to display general hardware information for
the CMM module(s) installed in the chassis.
Use the
show cmm
command to display the following information:
•
Model name and description for each CMM
•
Part number and serial number
•
Hardware revision level
•
Manufacture date
•
Firmware version number
•
Administrative and operating status
•
Additional information, such as power control checksum, ASIC information, and chassis MAC
Address (see
for information on MAC address storage)
For a detailed information on the
show cmm
command, including output table descriptions, refer to the
CLI Reference Guide
.
