Alcatel AST570, Руководство пользователя

Страница: 111 / 300

Access methods for PPP
PPPoA configuration
11 Configuration and Use - Routed PPPoA
111 / 300
3EC 17766 AAAA TCZZA Ed. 04
11.2 Using Routed PPPoA
Three methods exist to open a Routed PPPoA session:
Dialin
The session is opened manually
Alwayson
After the AST570 is powered and finished its POST
successfully, the AST570 automatically tries to open the
session
Dialondemand
The session is opened automatically, triggered by the arrival
of packets at a/the AST570 Ethernet port, destined for a
Routed PPPoA connection.
Per default, following Routed PPPoA connections are
preconfigured:
DIALUP_PPP1 : dialin connection
DIALUP_PPP2 : alwayson connection
DHCP_SPOOF : spoofing connection.
In case these entries do not meet your requirements, you can
configure a new one as follows:
1. If needed, add an PPPoA phonebook entry with the correct
VPI/VCI on the ' Phonebook ' page.
2. On the ' PPP ' page, select this phonebook entry from the
'Destination' popdown list.
3. For this entry, select PPPoA in the ' Protocol ' field.
4. Select the correct encapsulation method from the
Encapulation' popdown list.
5. Optionally, enter user name and password.
6. Click .
7. Optionally, perform detailed configurations.
See section 9.3 for more information.