Configuring OSPFv3
OSPFv3 Application Example
OmniSwitch AOS Release 7 Advanced Routing Configuration Guide
March 2011
page 2-29
Router 3
-> ipv6 ospf interface vlan-23 area 0.0.0.0
-> ipv6 ospf interface vlan-31 area 0.0.0.0
-> ipv6 ospf interface vlan-30 area 0.0.0.3
IPv6 router interface vlan-23 was associated with OSPFv3 interface vlan-23, enabled, and assigned to the
backbone. IPv6 router interface vlan-31 was associated with OSPFv3 interface vlan-31, enabled, and
assigned to the backbone. IPv6 router interface vlan-30, which connects to end stations and attached
network devices, was associated with OSPFv3 interface vlan-30, enabled, and assigned to Area 0.0.0.3.
Step 5: Examine the Network
After the network has been created, you can check the various aspects using show commands:
•
For OSPFv3 in general, use the
show ipv6 ospf
command.
•
For areas, use the
show ipv6 ospf area
command.
•
For interfaces, use the
show ipv6 ospf interface
command.
•
To check for adjacencies formed with neighbors, use the
show ipv6 ospf neighbor
command.
•
For routes, use the
show ipv6 ospf routes
command.
