Alcatel-Lucent OmniTouch 8128 SE, Руководство пользователя

Страница: 33 / 63

8AL90344ENAAed01 27
OmniTouch™ 8128 SE WLAN Handset
6.3 In Call
NOTE: Some of these functions are system-dependent. The parameters are set up in
the Device Manager, refer to the Configuration Manual, WLAN Handset ,
TD 92923EN , and Installation and Operation Manual, Portable Device Manager,
Windows version , TD 92881EN .
6.3.1 Adjust Volume During Call
Press to increase the volume, and to decrease the volume. The handset now
stores and maintains the new volume level.
6.3.2 Open Contacts Menu During Call
NOTE: If configured in the Device Manager, it is possible to make an emergency call
while the handset/keypad is locked. During the ongoing emergency call, the soft
key “More” is disabled.
1 Press “More” during the call.
2 Select “Contacts” .
3 Press “Select”.
4 Select “Call contact” to search for a local or company phonebook contact, or
select “Central phonebook” to search for a central phonebook contact.
5 Press “Select”.
6 Select or search contact.
It is possible to call the selected contact by pressing “Call” or . When calling the
contact, the first call is put on hold. See also 6.3.4 Start New Call During Conversation
on page 28.
6.3.3 Turn Microphone On/Off During Call
NOTE: If configured in the Device Manager, it is possible to make an emergency call
while the handset/keypad is locked. During the ongoing emergency call, the soft
key “More” is disabled.
1 Press “More” during the call.
2 Select “Microphone off”.
3 Press “Select”.
The icon indicates a muted microphone. This means that the other party in an
ongoing call cannot hear you. To turn the microphone back on, do as follows:
1 Press “More” during the call
2 Select “Microphone on”.
3 Press “Select”.
It also possible to turn the microphone off/on by a long press on or .