Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 929 / 2018

Ethernet OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 25-17
ethoam endpoint
Creates an Ethernet OAM Maintenance End Point (MEP) in the specified MA.
ethoam endpoint mep_id domain {domain_name | mac_address} association association_name direc-
tion {up | down} {port slot/port | linkagg agg_num}
no ethoam endpoint mep_id domain domain_name association association_name
Syntax Definitions
mep_id Specifies the Maintenance Association End point. The valid range is
1–8191.
domain_name Specifies the domain name. For more information on the different
formats of the domain name, refer to
ethoam domain command on
page 25-3 .
mac_address Specifies the CFM system MAC address.
association_name Name of the Ethernet OAM Association. Up to 48 (minus the domain
name length) characters may be used.
up Sends CCMs towards the MAC Relay Entity .
down Sends CCMs away from the MAC Relay Entity.
slot/port Slot and port number to which this MEP is attached.
agg_num The aggregate ID to which this MEP is attached.
Defaults
N/A
Platforms Supported
OmniSwitch 6250-Metro Models
Usage Guidelines
•
Use the no form of this command to remove the created Ethernet OAM MEP.
•
The mep_id should be unique amid all those used by or available to the service provider in the speci-
fied MA.
Examples
-> ethoam endpoint 100 domain esd.alcatel-lucent.com association alcatel-sales
direction up port 3/10
-> ethoam endpoint 100 domain esd.alcatel-lucent.com association alcatel-sales
direction down port 3/10
-> no ethoam endpoint 100 domain esd.alcatel-lucent.com association alcatel-sales