Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 84 / 2018

Chassis Management and Monitoring Commands
page 2-32 OmniSwitch 6250 CLI Reference Guide November 2009
show hardware info
Displays the current system hardware information. Includes CPU, flash, RAM, NVRAM battery, jumper
positions, BootROM, and miniboot and FPGA information.
show hardware info
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command may be used when logged into the switch that performs either as the primary or secondary
CMM role in a stack.
Examples
-> show hardware info
CPU Type : PowerPC 8245,
Flash Manufacturer : TOSHIBA,
Flash size : 67108864 bytes (64 MB),
RAM Manufacturer : (null),
RAM size : 268435456 bytes (256 MB),
NVRAM Battery OK ? : YES,
BootROM Version : 6.1.2.20.R02 ,
Backup Miniboot Version : 6.1.2.20.R02,
Default Miniboot Version : 6.1.2.20.R02,
Product ID Register : 54
Hardware Revision Register : 00
CPLD Revision Register : 06
XFP Module ID : 02
output definitions
CPU Type The manufacturer and model number of the CPU used on the CMM.
Flash Manufacturer The manufacturer of the flash memory used on the CMM.
Flash size The total amount of flash memory (i.e., file space) on the CMM. This
field specifies the total flash memory size only and does not indicate
the amount of memory free or memory used.
RAM Manufacturer The manufacturer of the RAM memory used on the CMM.
RAM size The total amount of RAM memory on the CMM. This field specifies
the total RAM memory only and does not indicate the amount of mem-
ory free or memory used.