Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 554 / 2018

Distributed Spanning Tree Commands
page 16-114 OmniSwitch 6250 CLI Reference Guide November 2009
bridge rrstp ring vlan-tag
Modifies the unique vlan-tag associated with the ring. The previous ring vlan-tag will be over-written.
bridge rrstp ring ring_id vlan-tag vid
Syntax Definitions
ring_id A numeric value (1–128) that identifies the RRSTP ring.
vid The VLAN identification number of preconfigured VLAN with which
ring ports are 802.1q tagged. The RRSTP ring frames shall be 802.1q
tagged with this VLAN.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The RRSTP ring can have only one VLAN tag associated with it.
•
Untagged RRSTP frames shall be generated if the specified vlan-tag is the default VLAN of the ports.
•
The ring ports must be 802.1q tagged with the new vlan-tag before modifying the ring vlan-tag .
•
RRSTP frames has 802.1q priority similar to STP BPDUs. In order to retain this priority, use the qos
trust ports command.
Examples
-> bridge rrstp ring 1 vlan-tag 10
-> bridge rrstp ring 5 vlan-tag 20
-> bridge rrstp ring 11 vlan-tag 11
Release History
Release 6.6.1; command was introduced.
Related Commands
bridge rrstp ring Creates a RRSTP ring comprising of two ports.
show bridge rrstp ring Displays information for all the rings or a specific ring present in the
system.