Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 286 / 2018

Configuration File Manager Commands
page 9-6 OmniSwitch 6250 CLI Reference Guide November 2009
show configuration status
Displays whether there is a pending timer session scheduled for a configuration file and indicates whether
the running configuration and the saved configuration files are
identical or different . This command also
displays the number of error files that will be held in the flash directory.
show configuration status
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
A timer session can be scheduled using the configuration apply command. For more information,
refer to page 9-2 .
•
The screen output File configuration </path/filename>: scheduled at dd/mm hh:mm indicates that a
timer session has been scheduled for a later time.
•
The output No file configuration has been scheduled indicates an idle timer session (i.e., no timer
session has been scheduled for a configuration file).
•
The output File configuration is in progress indicates that a file is currently being applied to the
switch.
•
The output File configuration </path/filename>: completed with 2 errors indicates that the named
file was applied to the switch with two recorded errors.
•
When the running and saved configurations are the same, the output Running configuration and
saved configuration are identical will be displayed.
•
When the running and saved configurations are the different, the output Running configuration and
saved configuration are different will be displayed.
•
To synchronize the running and saved configuration, use the write memory command.
Examples
-> show configuration status
Release History
Release 6.6.1; command was introduced.