Alcatel-Lucent OmniSwitch 6250, Справочное руководство CLI, Страница: 1952 / 2018

802.1X Commands
page 44-26 OmniSwitch 6250 CLI Reference Guide November 2009
show 802.1x
Displays information about ports configured for 802.1X.
show 802.1x [slot/port]
Syntax Definitions
slot The slot of the port for which you want to display information.
port The port for which you want to display 802.1X information.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
If you do not specify a particular slot/port, information for all 802.1X ports is displayed.
Examples
-> show 802.1x 1/13
802.1x configuration for slot 1 port 13:
direction = both,
operational directions = both,
port-control = auto,
quiet-period (seconds) = 60,
tx-period (seconds) = 30,
supp-timeout (seconds) = 30,
server-timeout (seconds) = 30,
max-req = 2,
re-authperiod (seconds) = 3600,
reauthentication = no
Supplicant polling retry count = 2
output definitions
direction
Whether the port is configured for control on bidirectional traffic or
incoming traffic only. May be configured through the
802.1x com-
mand. Possible values are both or in .
operational directions
The operational state of controlled direction on the port, which is set
automatically by the switch. If the value of
direction is both , the value
of operational directions is both . If the value of direction is in , the
operational state is set to in on initialization and when the port’s MAC
address becomes operable. If the port’s MAC address becomes inopera-
ble, the operational direction is set to
both .