Using the telephone in E-GAP or GAP mode
8AL90386ENABed01
49 /76
8
Using the telephone in E-GAP or GAP
mode
Your telephone complies with the E-GAP/GAP standard and can be used as described in this section. This
chapter describes features when connected to an OXO Connect IP-DECT radio base station or a
compatible GAP system. Some features depend on the type of radio base station you are connected to.
Some features such as conference are not available when connected to an IP-DECT radio base station.
Unless otherwise specified, the functions described below are available on your telephone in combination
with the mandatory functions provided by your fixed GAP system.
Automatic transfer between radio cells:
This telephone function enables you to move around between radio relay units, without any break in
communications. However, this facility depends on the inherent limitations of the fixed system, notably its
ability to manage several radio relays.
Display function:
When a call is made from the telephone, the digits dialed are displayed. When you receive a call, the
display indicates the caller's number or name, if this function is provided by the fixed system.
This utilisation may involve functional restrictions outside the coverage of our guarantee.
8.1 Phone description
8254 DECT Handset
8234 DECT Handset
•
Make a call.
•
Answer the call.
•
Long press (feature depending on the system): redial last number or
access the redial list.
•
Switching between two calls (Broker call).
•
Switch off ringer.
•
Hang up.
•
Long press: Switch on the phone / Switch off the phone.
