manualshive.com logo in svg

Alcatel-Lucent 7950, Руководство по качеству обслуживания, Страница: 176 / 612

Поделиться
Скачать
Alcatel-Lucent 7950 Скачать руководство пользователя страница 176

Service Ingress QoS Policy Commands

Page 176

7950 XRS Quality of Service Guide

Service Ingress QoS Policy Commands

sap-ingress

Syntax

[

no

]

 sap-ingress 

policy-id | policy-name

Context

config>qos

Description

This command is used to create or edit the ingress policy. The ingress policy defines the Service Level 
Agreement (SLA) enforcement service packets receive as they ingress a SAP. SLA enforcement is 
accomplished through the definition of queues that have Forwarding Class (FC), Committed Information 
Rate (CIR), Peak Information Rate (PIR), Committed Burst Size (CBS), and Maximum Burst Size (MBS) 
characteristics. The simplest policy defines a single queue that all ingress traffic flows through. Complex 
policies have multiple queues combined with specific IP or MAC match criteria that indicate which queue a 
packet will flow though. 

Policies in effect are templates that can be applied to multiple services as long as the 

scope

 of the policy is 

template. Queues defined in the policy are not instantiated until a policy is applied to a service SAP.

A SAP ingress policy is considered incomplete if it does not include definition of at least one queue and 
does not specify the default action. The OS does not allow incomplete SAP ingress policies to be applied to 
services.

SAP ingress policies can be defined with either IP headers as the match criteria or MAC headers as the 
match criteria. The IP and MAC criteria are mutually exclusive and cannot be part of the same SAP ingress 
policy. 

It is possible that a SAP ingress policy will include the 

dscp 

map command, the 

dot1p 

map command and 

an IP or MAC match criteria. When multiple matches occur for the traffic, the order of precedence will be 
used to arrive at the final action. The order of precedence is as follows:

1. 802.1p bits

2. DSCP

3. IP Quintuple or MAC headers

The SAP ingress policy with 

policy-id

 1 is a system-defined policy applied to services when no other policy 

is explicitly specified. The system SAP ingress policy can be modified but not deleted. The 

no sap-ingress

 

command restores the factory default settings when used on 

policy-id

 1. The default SAP ingress policy 

defines one queue associated with the best effort (

be

) forwarding class, with CIR of zero and PIR of line 

rate.

Any changes made to the existing policy, using any of the sub-commands are applied immediately to all 
services where this policy is applied. For this reason, when many changes are required on a policy, it is 
recommended that the policy be copied to a work area policy ID. That work-in-progress policy can be 
modified until complete and then written over the original policy-id. Use the 

config qos copy

 command to 

maintain policies in this manner.

The 

no sap-ingress 

policy-id

 command deletes the SAP ingress policy. A policy cannot be deleted until it is 

removed from all services where it is applied. The system default SAP ingress policy is a special case; the

 

no

 command restores the factory defaults to policy-id 1.

Содержание 7950





































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов