Alcatel-Lucent 7950 XRS Series, Руководство по настройке

Страница: 368 / 502

System Command Reference
Page 368 7950 SR OS Basic System Configuration Guide
end-time
Syntax [ no ] end-time [ date | day-name ] time
Context config>cron>sched
Description
This command is used concurrently with type periodic or calendar . Using the type of periodic , end-time
determines at which interval the schedule will end. Using the type of calendar , end-time determines on
which date the schedule will end.
When no end-time is specified, the schedule runs forever.
Parameters date — Specifies the date to schedule a command.
Values YYYY:MM:DD in year:month:day number format
day-name — Specifies the day of the week to schedule a command.
Values sunday|monday|tuesday|wednesday|thursday|friday|saturday
time — Specifies the time of day to schedule a command.
Values hh:mm in hour:minute format
hour
Syntax [ no ] hour {.. hour-number [.. hour-number ]| all }
Context config>cron>sched
Description This command specifies which hour to schedule a command. Multiple hours of the day can be specified.
When multiple hours are configured, each of them will cause the schedule to trigger. Day-of-month or
weekday must also be specified. All days of the month or weekdays can be specified. If an hour is
configured without configuring
month , weekday , day-of-month , and minute , the event will not execute.
The no form of this command removes the specified hour from the configuration.
Parameters
hour-number — Specifies the hour to schedule a command.
Values
0 — 23 (maximum 24 hour-numbers)
all — Specifies all hours.
interval
Syntax [ no ] interval seconds
Context config>cron>sched
Description
This command specifies the interval between runs of an event.