manualshive.com logo in svg

Alcatel-Lucent 7950 SR, Руководство по управлению системой

Поделиться
Скачать
Alcatel-Lucent 7950 SR Скачать руководство пользователя страница 46

Other Security Features

Page 46

7950 SR OS System Management Guide

Other Security Features

Secure Shell (SSH)

Secure Shell Version 1 (SSH) is a protocol that provides a secure, encrypted Telnet-like 
connection to a router. A connection is always initiated by the client (the user). Authentication 
takes places by one of the configured authentication methods (local, RADIUS, or ). 
With authentication and encryption, SSH allows for a secure connection over an insecure 
network. 

The OS allows you to configure Secure Shell (SSH) Version 2 (SSH2). SSH1 and SSH2 are 
different protocols and encrypt at different parts of the packets. SSH1 uses server as well as 
host keys to authenticate systems whereas SSH2 only uses host keys. SSH2 does not use the 
same networking implementation that SSH1 does and is considered a more secure, efficient, 
and portable version of SSH.

SSH runs on top of a transport layer (like TCP or IP), and provides authentication and 
encryption capabilities.

The OS has a global SSH server process to support inbound SSH and SCP sessions initiated 
by external SSH or SCP client applications. The SSH server supports SSHv1. Note that this 
server process is separate from the SSH and SCP client commands on the routers which 
initiate outbound SSH and SCP sessions. 

Inbound SSH sessions are counted as inbound telnet sessions for the purposes of the maximum 
number of inbound sessions specified by Login Control. Inbound SCP sessions are counted as 
inbound ftp sessions by Login Control.

When SSH server is enabled, an SSH security key is generated. The key is only valid until 
either the node is restarted or the SSH server is stopped and restarted (unless the preserve-key 
option is configured for SSH). The key size is non-configurable and set at 1024 bits. When the 
server is enabled, both inbound SSH and SCP sessions will be accepted provided the session is 
properly authenticated.

When the global SSH server process is disabled, no inbound SSH or SCP sessions will be 
accepted.

When using SCP to copy files from an external device to the file system, the SCP server will 
accept either forward slash (“/”) or backslash (“\”) characters to delimit directory and/or 
filenames. Similarly, the SCP client application can use either slash or backslash characters, 
but not all SCP clients treat backslash characters as equivalent to slash characters. In 
particular, UNIX systems will often times interpret the backslash character as an “escape” 
character which does not get transmitted to the SCP server. For example, a destination 

Содержание 7950 SR















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды