manualshive.com logo in svg

Alcatel-Lucent 7950 SR, Руководство по управлению системой

Поделиться
Скачать
Alcatel-Lucent 7950 SR Скачать руководство пользователя страница 445

Facility Alarms

7950 SR OS System Management Guide

Page 445

Facility Alarm Severities and Alarm LED Behavior

The Alarm LEDs on the CPM/CCM reflects the current status of the Facility Alarms:

•

The Critical Alarm LED is lit if there is 1 or more active Critical Facility Alarms

•

Similarly with the Major and Minor alarm LEDs

•

The OT Alarm LED is not controlled by the Facility Alarm module

The supported alarm severities are as follows:

•

Critical (with an associated LED on the CPM/CCM)

•

Major (with an associated LED on the CPM/CCM)

•

Minor (with an associated LED on the CPM/CCM)

•

Warning (no LED)

Alarms inherit their severity from the raising event.

Log events that are a raising event for a facility alarm configured with a severity of 

indeterminate

 

or 

cleared

 will result in those alarms not being raised (but clearing events are processed in order to 

clear alarms regardless of the severity of the clearing event).

Changing the severity of a raising event only affects subsequent occurrences of that event and 
alarms. Alarms that are already raised when their raising event severity is changed maintain their 
original severity.

Содержание 7950 SR















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды