manualshive.com logo in svg

Alcatel-Lucent 7950 SR, Руководство по управлению системой

Поделиться
Скачать
Alcatel-Lucent 7950 SR Скачать руководство пользователя страница 382

Syslog Commands

Page 382

7950 SR OS System Management Guide

Syslog Commands

syslog

Syntax

[

no

]

 syslog syslog-id

Context

config>log

Description

This command creates the context to configure a syslog target host that is capable of receiving 
selected syslog messages from this network element.

A valid 

syslog-id

 must have the target syslog host address configured. 

A maximum of 10 syslog-id’s can be configured.

No log events are sent to a syslog target address until the syslog-id has been configured as the log 
destination (

to

) in the log-id node. 

Default

No syslog IDs are defined.

Parameters

syslog-id — 

The syslog ID number for the syslog destination, expressed as a decimal integer.

Values

1 

—

 10

address

Syntax

address ip-address
no address

Context

config>log>syslog 

syslog-id

Description

This command adds the syslog target host IP address to/from a syslog ID.

This parameter is mandatory. If no 

address

 is configured, syslog data cannot be forwarded to the 

syslog target host. 

Only one address can be associated with a 

syslog-id

. If multiple addresses are entered, the last 

address entered overwrites the previous address. 

The same syslog target host can be used by multiple log IDs.

The 

no

 form of the command removes the syslog target host IP address.

Default

no address

 — There is no syslog target host IP address defined for the syslog ID.

Parameters

ip-address — 

The IP address of the syslog target host in dotted decimal notation.

Содержание 7950 SR















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды