Alcatel-Lucent 7950 SR, Руководство по управлению системой

Страница: 381 / 462

Event and Accounting Logs
7950 SR OS System Management Guide Page 381
subject
Syntax subject { eq|neq } subject [ regexp ]
no subject
Context config>log>filter filter-id >entry entry-id >match
Description
This command adds an event subject as a match criterion.
The subject is the entity for which the event is reported, such as a port. In this case the port-id string
would be the subject. Only one
subject command can be entered per event filter entry. The latest
subject command overwrites the previous command.
The no form of the command removes the subject match criterion.
Default
no subject — No subject match criterion specified.
Parameters
eq | neq — This operator specifies the type of match. Valid operators are listed in the following table:
subject — A string used as the subject match criterion.
regexp — Specifies the type of string comparison to use to determine if the log event matches the
value of subject command parameters. When the regexp keyword is specified, the string in the
subject command is a regular expression string that will be matched against the subject string in
the log event being filtered.
When regexp keyword is not specified, the subject command string is matched exactly by the
event filter.
Operator Notes
eq equal to
neg not equal to