manualshive.com logo in svg

Alcatel-Lucent 7950 SR, Руководство по управлению системой

Поделиться
Скачать
Alcatel-Lucent 7950 SR Скачать руководство пользователя страница 176

CPM Filter Commands

Page 176

7950 SR OS System Management Guide

The 

default-action

 is applied to a packet that does not satisfy any match criteria in any of the man-

agement access filters. Whenever management access filters are configured, the 

default-action

 must 

be defined.

Default

No default-action is defined.

Parameters

permit — 

Specifies that packets not matching the configured selection criteria in any of the filter 

entries will be permitted.

deny — 

Specifies that packets not matching the selection criteria be denied and that an ICMP host 

unreachable message will not be issued.

dscp

Syntax

dscp dscp-name
no dscp

Context

config>sys>sec>cpm>ip-filter>entry

>

match

config>sys>sec>cpm>ipv6-filter>entry>match
config>sys>sec>cpm>mac-filter>entry>match

Description

This command configures a DiffServ Code Point (DSCP) name to be used as an IP filter match crite-
rion.

The 

no

 form of the command removes the DSCP match criterion.

Default

no dscp

 — No dscp match criterion.

Parameters

dscp-name — 

Configures a dscp name that has been previously mapped to a value using the 

dscp-

name

 command. The DiffServ code point may only be specified by its name. 

dst-ip

Syntax

dst-ip ipv6-address/prefix-length
dst-ip ipv6-prefix-list ipv6-prefix-list-name
no dst-ip

Context

config>sys>sec>cpm>ip-filter>entry

>

match

cfg>sys>sec>cpm>ipv6-filter>entry>match

Description

This command configures a destination IP address range to be used as an IP filter match criterion.

To match on the destination IP address, specify the address and its associated mask, for example, 
10.1.0.0/16. The conventional notation of 10.1.0.0 255.255.0.0 may also be used.

The 

no

 form of the command removes the destination IP address match criterion. 

Default

No destination IP match criterion

Parameters

ip-address — 

Specifies the IP address for the IP match criterion in dotted decimal notation.

Values

0.0.0.0 

—

 255.255.255.255

Содержание 7950 SR















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды