Alcatel-Lucent 7950 SR, Руководство по управлению системой

Страница: 154 / 462

User Management Commands
Page 154 7950 SR OS System Management Guide
Description This command creates the context to configure SNMP group membership for a specific user and
defines encryption and authentication parameters.
All SNMPv3 users must be configured with the commands available in this CLI node.
The OS always uses the configured SNMPv3 user name as the security user name.
user-template
Syntax user-template { tacplus_default | radius_default }
Context config>system>security
Description This command configures default security user template parameters.
Parameters tacplus_default — Specifies that the default user template is actively applied to the
user.
radius_default — specifies that the default RADIUS user template is actively applied to the
RADIUS user if no VSAs are returned with the auth-accept from the RADIUS server.
user
Syntax [ no ] user user-name
Context config>system>security
Description This command creates a local user and a context to edit the user configuration.
If a new user-name is entered, the user is created. When an existing user-name is specified, the user
parameters can be edited.
When creating a new user and then entering the info command, the system displays a password in the
output. This is expected behavior in the hash2 scenario. However, when using that user name, there
will be no password required. The user can login to the system and then <ENTER> at the password
prompt, the user will be logged in.
Unless an administrator explicitly changes the password, it will be null. The hashed value displayed
uses the username and null password field, so when the username is changed, the displayed hashed
value will change.
The no form of the command deletes the user and all configuration data. Users cannot delete them-
selves.
Default none
Parameters user-name — The name of the user up to 16 characters.