Alcatel-Lucent 7750 SR OS, Руководство по настройке интерфейса

Страница: 209 / 444

Interface Configuration
7750 SR OS Interface Configuration Guide Page 209
egress-scheduler-policy
Syntax egress-scheduler-policy port-scheduler-policy-name
no egress-scheduler-policy
Context config>port>ethernet
config>port>tdm>ds3
config>port>tdm>ds1>channel-group
config>port>tdm>e3
config>port>tdm>ds3>channel-group
Description
This command enables the provisioning of an existing port-scheduler-policy to a port or channel. The
egress-scheduler-override node allows for the definition of the scheduler overrides for a specific port
or channel.
When a port scheduler is active on a port or channel, all queues and intermediate service schedulers
on the port are subject to receiving bandwidth from the scheduler. Any queues or schedulers with
port-parent associations are mapped to the appropriate port priority levels based on the port-parent
command parameters. Any queues or schedulers that do not have a port-parent or valid intermediate
scheduler parent defined are treated as orphaned and are handled based on the port scheduler policies
default or explicit orphan behavior.
The port scheduler maximum rate and priority level rate parameters may be overridden to allow
unique values separate from the port-scheduler-policy-name attached to the port or channel. Use the
egress-scheduler-override command to specify the port or channel specific scheduling parameters.
The command used to associate an egress scheduler policy on the port is overloaded for HSMDA.
HSMDA policies should be associated with HSMDA ports.
The no form of this command removes a port scheduler policy from an egress port or channel. Once
the scheduler policy is removed, all orphaned queues and schedulers revert to a free running state
governed only by the local queue or scheduler parameters. This includes any queues or schedulers
with a port-parent association.
Parameters
port-scheduler-policy-name — Specifies an existing port-scheduler-policy configured in the
config>qos context.
mode
Syntax mode { access | network }
no mode
Context config>port > ethernet
config>port>sonet-sdh>path
config>port>tdm>ds1>channel-group
config>port>tdm>ds3
config>port>tdm>e1>channel-group
config>port>tdm>e3
Description
This command configures an Ethernet port, TDM channel or SONET/SDH path (sub-port) for access
or network mode operation.