Alcatel-Lucent 7750 SR OS, Руководство по настройке интерфейса

Страница: 208 / 444

Configuration Commands
Page 208 7750 SR OS Interface Configuration Guide
rate pir-rate — Overrides the port scheduler policy’s maximum level rate and requires either the
max keyword or a rate defined in kilobits-per-second to follow.
Values 1 — 40000000, max
cir cir-rate — Overrides the port scheduler policy’s within-cir level rate and requires either the max
keyword or a rate defined in kilobits-per-second to follow.
Values 0— 40000000, max
max — removes any existing rate limit imposed by the port scheduler policy for the priority level
allowing it to use as much total bandwidth as possible.
max-rate
Syntax max-rate rate
no max-rate
Context config>port>ethernet>egress-scheduler-override
config>port>sonet-sdh>path>egress-scheduler-override
config>port>tdm>ds3>egress-scheduler-override
config>port>tdm>ds1>channel-group>egress-scheduler-override
config>port>tdm>e3>egress-scheduler-override
config>port>tdm>e1>channel-group>egress-scheduler-override
Description This command overrides the max-rate parameter found in the port-scheduler-policy associated with
the port. When a max-rate is defined at the port or channel level, the port scheduler policies max-rate
parameter is ignored.
The egress-scheduler-override max-rate command supports a parameter that allows the override
command to restore the default of not having a rate limit on the port scheduler. This is helpful when
the port scheduler policy has an explicit maximum rate defined and it is desirable to remove this limit
at the port instance.
The no form of this command removes the maximum rate override from the egress port or channels
port scheduler context. Once removed, the max-rate parameter from the port scheduler policy
associated with the port or channel will be used by the local scheduler context.
Parameters rate — Specifies the explicit maximum frame based bandwidth limit. This value overrides the QoS
scheduler policy rate.
Values 1 — 40000000, max