Alcatel-Lucent 7750 SR-OS, Руководство по настройке

Страница: 78 / 674

Common Configuration Tasks
Page 78 7750 SR OS Router Configuration Guide
Configuring IPv6 Parameters
The following displays the interface configuration showing the IPv6 default configuration when
IPv6 is enabled on the interface.
A:ALA-49>config>router>if>ipv6# info detail
----------------------------------------------
port 1/3/37
ipv6
packet-too-big 100 10
param-problem 100 10
redirects 100 10
time-exceeded 100 10
unreachables 100 10
exit
----------------------------------------------
A:ALA-49>config>router>if>ipv6# exit all
The following displays an IPv6 configuration example.
A:ALA-49>config>router>if# info
----------------------------------------------
address 10.11.10.1/24
port 1/3/37
ipv6
address 10::1/24
exit
----------------------------------------------
A:ALA-49>config>router>if#
An Example of a IPv6 Over IPv4 Tunnel Configuration
The IPv6 address is the next-hop as it is received through BGP. The IPv4 address is the system
address of the tunnel's endpoint static-route ::C8C8:C802/128 indirect 200.200.200.2
This configuration displays an example to configure a policy to export IPv6 routes into BGP.
CLI Syntax:
config>router
bgp
export policy-name [ policy-name ...(upto 5 max)]
router-id ip-address
group name
family [ipv4] [vpn-ipv4] [ipv6] [mcast-ipv4]
type {internal|external}
neighbor ip-address
local-as as-number [private]
peer-as as-number
The following displays the configuration showing the policy output.