Alcatel-Lucent 7750 SR-OS, Руководство по настройке

Страница: 67 / 674

IP Router Configuration
7750 SR OS Router Configuration Guide Page 67
Configuring IPv6 Parameters
IPv6 interfaces and associated routing protocols may only be configured on the following systems:
• Chassis systems running in chassis mode c or d.
• Chassis systems running in mixed-mode, with IPv6 functionality limited to those interface
on slots with IOM3-XPs/IMMs or later line cards.
• 7750 SR-c4/12.
The following displays the interface configuration showing the IPv6 default configuration when
IPv6 is enabled on the interface.
A:ALA-49>config>router>if>ipv6# info detail
----------------------------------------------
‘ port 1/2/37
ipv6
packet-too-big 100 10
param-problem 100 10
redirects 100 10
time-exceeded 100 10
unreachables 100 10
exit
----------------------------------------------
A:ALA-49>config>router>if>ipv6# exit all
Use the following CLI syntax to configure IPv6 parameters on a router interface.
CLI Syntax:
config>router# interface interface-name
port port-name
ipv6
address { ipv6-address / prefix-length } [eui-64]
icmp6
packet-too-big [ number seconds ]
param-problem [ number seconds ]
redirects [ number seconds ]
time-exceeded [ number seconds ]
unreachables [ number seconds ]
neighbor ipv6-address mac-address
The following displays a configuration example showing interface information.
A:ALA-49>config>router>if# info
----------------------------------------------
address 10.11.10.1/24
port 1/2/37
ipv6
address 10::1/24
exit
----------------------------------------------
A:ALA-49>config>router>if#