Alcatel-Lucent 7750 SR-OS, Руководство по настройке

Страница: 513 / 674

Filter Policies
7750 SR OS Router Configuration Guide Page 513
Please see general description related to match-list usage in filter policies.
Parameters
ipv6-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
characters are used, the string must be enclosed within double quotes.
apply-path
Syntax apply-path
no apply-path
Context config>filter>match-list>ip-pfx-list
config>filter>match-list>ipv6-pfx-list
Description
This command enables context to configure auto-generation of address prefixes for IPv4 or IPv6
address prefix match lists. The context the command is executed governs whether IPv4 or IPv6
prefixes will be auto-generated.
The no form of this command removes all auto-generation configuration under the apply-path
context.
Default no apply path
bgp-peers
Syntax bgp-peers index group reg-exp neighbor reg-exp
no bgp-peers index
Context config>filter>match-list>ip-pfx-list>apply-path
config>filter>match-list>ipv6-pfx-list>apply-path
Description This command configures auto-generation of IPv4 or IPv6 address prefixes (as required by the
context the command is executed within) based on the base router BGP instance configuration.
group:
Configures a match against base router BGP instance group configuration.
Regex wildcard match (.*) can be used to match against any group.
neighbor:
Configures a match against base router BGP instance neighbor configuration.
Regex wildcard match (.*) can be used to match against any neighbor.
The no form of this command removes the bgp-peers configuration for auto-generation of address
prefixes for the specified index value.
Default
No embedded filter policies are included in a filter policy.
Parameters
index — An integer from 1 to 255 enumerating bgp-peers auto-generation configuration within this
list.