Alcatel-Lucent 7750 SR-OS, Руководство по настройке

Страница: 28 / 674

Configuring IP Router Parameters
Page 28 7750 SR OS Router Configuration Guide
QPPB
There are two main aspects of the QPPB feature:
• The ability to associate a forwarding-class and priority with certain routes in the routing
table.
• The ability to classify an IP packet arriving on a particular IP interface to the forwarding-
class and priority associated with the route that best matches the packet.
Associating an FC and Priority with a Route
This feature uses a command in the route-policy hierarchy to set the forwarding class and
optionally the priority associated with routes accepted by a route-policy entry. The command has
the following structure:
fc fc-name [priority {low | high}]
The use of this command is illustrated by the following example:
config>router>policy-options
begin
community gold members 300:100
policy-statement qppb_policy
entry 10
from
protocol bgp
community gold
exit
action accept
fc h1 priority high
exit
exit
exit
commit
The fc command is supported with all existing from and to match conditions in a route policy entry
and with any action other than reject, it is supported with next-entry, next-policy and accept
actions. If a next-entry or next-policy action results in multiple matching entries then the last entry
with a QPPB action determines the forwarding class and priority.
A route policy that includes the fc command in one or more entries can be used in any import or
export policy but the fc command has no effect except in the following types of policies:
• VRF import policies:

config>service>vprn>vrf-import