Alcatel-Lucent 7750 SR-OS, Руководство по настройке

Страница: 242 / 674

Show Commands
Page 242 7750 SR OS Router Configuration Guide
policy-edits
Syntax policy-edits
Context show>router
Description This command displays edited policy information.
route-table
Syntax route-table [ family ] [ ip-prefix [/ prefix-length ] [ longer | exact | protocol protocol-name ] [ all ]]
[ next-hop-type type ][ qos ][ alternative ]
route-table [ family ] summary
route-table tunnel-endpoints [ ip-prefix[/prefix-length ]] [ longer | exact ] [ detail ]
Context show>router
Description This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
Parameters
family — Specify the type of routing information to be distributed by this peer group.
Values
ipv4 — Displays only those BGP peers that have the IPv4 family enabled and not
those capable of exchanging IP-VPN routes.
ipv6 — Displays the BGP peers that are IPv6 capable.
mcast-ipv4 — Displays the BGP peers that are IPv4 multicast capable.
mcast-ipv6 — Displays multicast IPv6 route table.
ip-prefix [ / prefix-length ] — Displays routes only matching the specified ip-address and length.
Values ipv4-prefix: a.b.c.d (host bits must be set to 0)
ipv4-prefix-length: 0 — 32
ipv6 ipv6-prefix[/pref*: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
prefix-length: 1 — 128ipv6
longer — Displays routes matching the ip-prefix / mask and routes with longer masks.
exact — Displays the exact route matching the ip-prefix / mask masks.
protocol protocol-name — Displays routes learned from the specified protocol.
Values local, sub-mgmt, managed, static, ospf, ospf3, isis, rip, aggregate, bgp, bgp-vpn
summary — Displays a route table summary information.
tunnel-endpoints — Specifies to include tunnel endpoint information.