manualshive.com logo in svg

Alcatel-Lucent 7710 SR SONET, Руководство по настройке

Поделиться
Скачать
Alcatel-Lucent 7710 SR SONET Скачать руководство пользователя страница 211

Interface Configuration

7710 SR OS Interface Configuration Guide

Page 185

Signal failure (SF) and signal degrade (SD) alarms are not enabled by default on POS interfaces. It is 
recommended to change the default alarm notification configuration for POS ports that belong to APS 
groups in order to be notified of SF/SD occurrences to be able to interpret the cause for an APS group to 
switch the active line.

For path alarms, modify the logical line aps-id in the 

configure port aps-id sonet-sdh path 

report-

alarm

 

context. For example:

configure port 

aps-1

 sonet-sdh path report-alarm p-ais

For line alarms, separately, modify the 2 physical ports that are members of the logical aps-id port (the 
working and protect lines). APS reacts only to line alarms, not path alarms. 
For example:

configure port 

1/2/3

 sonet-sdh report-alarm lb2er-sd

configure port 

1/3/4

 sonet-sdh report-alarm lb2er-sd

For example:

A:ALA-48>config>port>aps# info

----------------------------------------------

            working-circuit 1/2/3

            protect-circuit 1/3/4

----------------------------------------------

A:ALA-48>config>port>aps#

If the SD and SF 

threshold

 rates must be modified, the changes must be performed at the line level on 

both the working and protect APS port member. 

The 

no

 form of this command deletes an aps-

group-id

 or bundle-aps-group-id. In order for an aps-

group-id

 to be deleted, 

The same rules apply for physical ports, bundles deletions apply to APS ports/bundles deletions (for 
example an aps-group-id must be shutdown, have no service configuration on it, and no path 
configuration on it). In addition working and protection circuits must be removed before an aps-group-
id may be removed.

Syntax:

 

port

 

aps

-

group-id

 

aps

:

keyword

group-id

: 1 — 16

Example: 

port

 

aps

-16

ddm-events

Syntax

[

no

] 

ddm-events

Context

config>port

Description

This command enables Digital Diagnostic Monitoring (DDM) events for the port.

The 

no

 form of the command disables DDM events.

Содержание 7710 SR SONET

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды