Alcatel-Lucent 7705 SAR Скачать руководство пользователя страница 98

Страница: 98 / 356

Security Command Reference

7705 SAR OS System Management Guide

icmp-type

Syntax

icmp-type

icmp-type

no icmp-type

Context

config>system>security>cpm-filter>ip-filter>entry>match
config>system>security>cpm-filter>ipv6-filter>entry>match

Description

This command configures matching on an ICMP type field in the ICMP header of an IP packet as an
IP filter match criterion.

The ICMP protocol must be configured using the match command before this filter can be configured.

The

form of the command removes the criterion from the match entry.

Default

no icmp-type

Parameters

icmp-type —

specifies the ICMP type values that must be present to match

Values

0 to 255 (values can be expressed in decimal, hexadecimal, or
binary – DHB)

ip-option

Syntax

ip-option

ip-option-value

[

ip-option-mask

]

no ip-option

Context

config>system>security>cpm-filter>ip-filter>entry>match

Description

This command configures matching packets with a specific IP option or a range of IP options in the IP
header as an IP filter match criterion.

The option type octet contains 3 fields:

•

1 bit copied flag (copy options in all fragments)

•

2 bits option class

•

5 bits option number

The

form of the command removes the match criterion.

This command applies to IPv4 filters only.

Default

no ip-option

Parameters

ip-option-value —

the 8-bit option type (can be entered using decimal, hexadecimal, or binary

formats). The mask is applied as an AND to the option byte and the result is compared with
the option value.

Содержание 7705 SAR




































































































































































































































































































































































Результаты поиска

Содержание 7705 SAR

Отзывы:

Похожие инструкции для 7705 SAR

Бренды по названию

Популярные бренды

Alcatel-Lucent 7705 SAR, Руководство по управлению системой

Результаты поиска

Содержание 7705 SAR

Отзывы:

Похожие инструкции для 7705 SAR

Бренды по названию

Популярные бренды